CLEAR ANSWERS TO YOUR ATTIC QUESTIONS
Got Questions?
Select a category below to quickly find solutions for your specific issue. Not seeing your question?
Call Us for Answers!
We work in the Dallas-Fort Worth area, including Dallas, Carrollton, and Arlington, and in the Austin and San Antonio area. Put your zip code in the inspection request form, and we’ll confirm whether we cover your address.
We serve Orange County, including Santa Ana, Orange, and Rancho Santa Margarita. Enter your zip code on the inspection request form and we’ll confirm coverage for your neighborhood.
All our work in performed in house by our trained professionals. We use absolutely no sub-contractors to perform our work.
We are licensed with both a specialty insulation license (C-2) and also a general contractor’s B license. Check out our license page on the CSLB (California State License Board). We are insured and comply with all bonds and workers compensation requirements.
Attic Construction was formed in 2011 right here in San Diego, CA. We are an accredited Better Business Bureau company and are licensed and insured. Please see our About Us page for more information about our company.
We provide an alternative solution for getting rid of rodents which is called rodent proofing. By sealing up all entry points into the structure we ensure no rodents can continue to enter the home. Please see our rodent proofing page for me information.
We do in home inspections Sunday through Friday. Our offices are open on Saturdays but we do not perform any inspections this day. Click here to request an attic inspection appointment.
Check out Yelp, Google+, Home Advisor or the BBB. In addition, we have a reference list by clients that have agreed to speak to clients like yourself and share their experience with our company. Feel free to contact our office and request these and we will gladly provide you a list.
High standards, systems to ensure quality of work; including management and quality control, as well as a high level of professionalism. We take time-stamped pictures of your attic/crawl space so you can have references of our work upon inspection and completion. Customer service is a number ONE priority for us…and we actually do care about our clients!
It depends on the crawl space. Vented crawl spaces are typically insulated between the floor joists, while sealed, encapsulated ones are usually insulated along the walls. We recommend what fits your foundation and moisture conditions.
Cost depends on your attic’s size, how much insulation is already there, and whether old material has to come out first. Your free inspection produces a written report with options and pricing, and financing is available for qualified homeowners.
We recommend blown-in fiberglass, and it’s the only type we install. It fills gaps around joists, vents, and wiring, and Owens Corning fiberglass is a solid fit for long Texas summers.
California’s energy code, known as Title 24, sets minimum insulation levels for new construction and many remodels, and the numbers depend on your climate zone. Your inspection shows how much insulation your attic has now, so you can judge what to add.
Sometimes. Utility and state programs change from year to year, depend on your utility and household, and some require an approved contractor. Confirm eligibility with your utility before you schedule work.
It can be, once moisture is under control. We clean the space, add a vapor barrier or liner where it’s needed, and then insulate, so the insulation isn’t sitting against damp ground.
Price depends on the square footage of your attic, what’s already up there, and whether old material needs to come out first. The written report from your free inspection lays out options and pricing, and qualified homeowners can use financing.
It depends on your climate zone and what your attic already has. For hot zones like the Phoenix area, ENERGY STAR’s guidance for existing attics runs roughly from R-38 to R-49, and your inspection shows where you stand.
Yes. Insulating ducts that run through a hot attic helps them hold their temperature better, reducing strain on your air conditioner and helping prevent condensation on the duct surface.
Yes. Leaky ductwork can waste a significant share of the conditioned air your system produces before it ever reaches your living space, which shows up directly in higher utility costs.
A full replacement typically takes one to two days, depending on the size of your home and how accessible your attic or crawl space is.
Often, yes. If your ductwork is in good structural condition but has gaps or loose connections, professional sealing is a cost-effective way to stop the air loss.
Cost depends on your attic’s square footage, the R-value your climate zone requires, and whether old material needs to be removed first. The only way to get an accurate number is with a free, in-person inspection.
Quality fiberglass insulation can last 20 to 30 years or more when it’s installed correctly and stays dry. Its lifespan can be shortened by moisture intrusion, pest activity, or physical disturbance, such as items stored directly on top of it.
Sometimes, if the existing material is dry, clean, and not compressed. If it shows signs of moisture, pests, or significant wear, we recommend removing it first so the new fiberglass performs the way it’s supposed to.
No. We work exclusively with fiberglass insulation because of its consistent performance, resistance to moisture, and long-term durability in the hot and mixed climates we serve. That focus lets us stand fully behind the material we install.
If you can see attic floor joists through the insulation, notice rooms that never quite reach a comfortable temperature, or your energy bills have crept up without an obvious cause, it’s worth having your coverage checked. A free inspection will tell you exactly where you stand.
Cost depends on your attic’s square footage, the R-value your climate zone requires, and whether old material needs to be removed first. The only way to get an accurate number is with a free, in-person inspection.
Most removals are completed in a matter of hours, though larger attics or heavily contaminated material can extend the timeline. A free inspection gives you a realistic estimate before work begins.
We primarily remove fiberglass and other standard insulation materials. If we suspect a hazardous material like vermiculite, we pause the job and recommend a specialized testing or abatement service rather than handling it ourselves.
Yes. Once the bulk material is out, we vacuum the remaining dust and debris from the floorboards so the space is ready for new insulation or any other attic work.
No. We use a closed-loop vacuum system that pulls debris directly from the attic to a truck parked outside, and we protect walkways and entry points so your living space stays clean throughout the job.
Not always. If your existing insulation is dry, clean, and not compressed, new material can often be added on top. If it shows signs of moisture, pests, or heavy wear, removal first gives the new insulation a clean base to work from.
Many homeowners notice a difference in comfort within the first few days, though the full impact on energy bills typically shows up over a full billing cycle or two as your air conditioner and heater settle into a lighter workload.
Yes. We calculate the depth needed to reach the R-value recommended for your climate zone before we start, rather than adding a standard amount regardless of what your home actually needs.
There’s some noise from the equipment while material is being blown in, but most homeowners stay home comfortably throughout the process. It’s a controlled job, not a demolition-level disruption.
We handle most of the prep ourselves, including covering stored items and sealing gaps, but it helps to clear a path to the attic access point beforehand so our team can get started right away.
Most attic installations are completed in a single day. The exact time depends on your attic’s size, accessibility, and whether prep work like air sealing is part of the job.
In a climate with this much sun, it often is. A radiant barrier reflects roof heat before it reaches your insulation, and it works best alongside enough insulation and sealed ducts. Your inspection shows whether it fits your attic.
Its main benefit is keeping summer heat out, but a radiant barrier can also reflect some indoor heat back into your living space during cooler months, adding a smaller secondary benefit outside of cooling season.
Not with proper installation. Because we install the barrier on the roof rafters rather than the attic floor, dust doesn’t settle on the reflective surface the way it would on a horizontal installation.
Many homeowners see a noticeable reduction in cooling costs during peak summer months, though the exact amount depends on your home’s sun exposure and existing insulation levels.
No. Radiant barriers typically raise shingle temperature by only a few degrees, well within what roofing manufacturers consider safe.
Yes. Insulation slows heat transfer through materials, while a radiant barrier reflects radiant heat before it reaches your attic. They work best as a pair, not as a replacement for one another.
Price depends on the size of your home, the condition of what’s already there, and how many services you combine. After your free inspection, you’ll get a written report with options and pricing, and financing is available for qualified homeowners.
Some of the same gaps that let air escape can also give rodents an entry point, so sealing them can support broader rodent proofing efforts, though a dedicated inspection is the best way to confirm full exclusion.
Sealing attic air leaks reduces the workload on your air conditioner and heater, which typically shows up as a noticeable difference in energy costs, especially when paired with proper insulation.
Most air sealing projects are completed in a single visit, though the exact time depends on your attic’s size and how many leak points need attention.
Before. Sealing the gaps first lets new or existing insulation perform the way it is supposed to, since insulation cannot compensate for air moving freely underneath it.
Common signs include drafts near ceilings, rooms that run hotter or colder than the rest of the house, rising energy bills, and an air conditioner or heater that runs longer than it used to.
Most attic cleanings are completed in a single visit, though the timeline depends on how much waste and buildup has accumulated over time.
Yes, as part of standard cleaning. For more extensive contamination, we recommend pairing cleaning with our decontamination service for a full sanitization.
We work carefully and use containment methods throughout the process to keep dust and debris from migrating into your living space while we clear out your attic.
Cleaning removes debris, waste, and old insulation that can contribute to musty smells. If the odor comes from extensive mold or rodent contamination, decontamination is the more targeted solution.
Yes. Installing fresh insulation over debris, waste, or old material traps contaminants and reduces performance. A clean attic ensures new insulation performs the way it’s supposed to.
Mice and rats are most active at night, but that doesn’t mean they’ve gone anywhere. Their nests stay in the insulation, so scratching at night and droppings by day both point to an active problem.
It depends on your policy and what caused the damage, and many standard policies exclude rodent damage. Ask your insurer before work begins, and we’ll share the photos from your inspection to support a claim.
Cost depends on your attic’s size, how much insulation has to come out, how far contamination has spread, and how many entry points need sealing. Your free report lays out GOOD, BETTER, and BEST options with pricing, and financing is available for qualified homeowners.
If rodents, moisture, or age have ruined your insulation, yes. New insulation laid over contamination traps the odors and droppings underneath, while restoration removes the source and gets your energy bills and air quality back in line.
Most decontamination projects are completed in a single visit, though the exact timeline depends on your attic’s size and the extent of the contamination found during inspection.
No. We use effective, hospital-grade disinfectants that neutralize bacteria and pathogens without relying on harsh chemicals that could affect your indoor air quality.
We address rodent droppings and urine, mold and mildew, and accumulated dust and allergens, treating each as a distinct hazard rather than a single generic mess.
It’s not recommended. Sweeping or vacuuming dried droppings with a standard household vacuum can release airborne particles that carry pathogens like hantavirus, which is why professional containment and disinfection matter.
Cost depends on the size of your attic and how extensive the contamination is. A free inspection gives you an accurate estimate rather than a guess based on square footage alone.
Yes. Rodent proofing is often paired with our decontamination service so that contaminated insulation and debris are fully removed, not just sealed behind new material.
Yes. Our exclusion work is backed by a warranty, so if a rodent manages to chew through a repair, we come back and fix it at no extra cost.
Most homes can be fully sealed in one to two days, depending on the size of the structure and how many entry points need attention.
Our primary focus is exclusion, sealing the home so rodents cannot get in. We may use traps to remove existing rodents, but we avoid relying on poison, since it doesn’t stop new ones from entering.
Rats can squeeze through holes as small as a quarter, and mice through even smaller gaps. Common entry points include roof vents, gaps around pipes, and cracks in the foundation.
Over 2,000 5-Star Reviews From Homeowners Like You
Here’s what real customers say after we fix their attics.